美国 Babbitt LS6000 液位开关

LS 6 0 0 0液位开关

LS6000是一个基本的，通用的，可以测量几乎所有的液体，干燥物料或接口的导电或不导电的产品液位开关。 专有的射频（RF）平衡阻抗桥具有优异的温度稳定性，从而省去了重新校准单元季节。

安装探头时，它被校准在材料接触探头的情况下。 当所需物质中与探针接触，LS6000被激活，并给出了所期望的输出。

所有必要的校准指标板上，所以您需要校准LS6000是小螺丝刀。

如果您订购的探头过长，干脆就把它砍下来用锯到所需长度。 如果您需要增加长度，焊接额外的棒。 所有长度的探头，可从工厂。

故障安全电子提供安心。 模块化电子设备进行故障排除和修复一个单元。 备份整个单元通过我们两年保修。

固体316不锈钢棒，聚甲醛树脂（聚四氟乙烯和可选其它材料）制成的绝缘体制成的探头。 密封件均采用氟橡胶“O”形圈。 所有的电子设备都装在铸铝防爆外壳。

PDF版资料册 - 这些都是大文件和下载的速度会发生变化。

• 下载免费的Adobe PDF阅读器
• LS 6000用户手册
• 液位开关手册

L S 6 0 0 0   Level Switch

The LS6000 is a basic, general-purpose level switch that can measure virtually any liquid, dry material or interface of electrically conductive or non-conductive products. The proprietary radio frequency (RF) balanced impedence bridge has exceptional temperature stability, thus eliminating the need to recalibrate the unit from season to season.

When the probe is installed, it is calibrated in absence of material touching the probe. When the desired material comes in contact with the probe, the LS6000 is activated and gives the desired output.

All the necessary calibration indicators are on-board so all you need to calibrate the LS6000 is a small screwdriver.

If the probe you ordered is too long, simply cut it off to the desired length with a saw. If you need to add length, just weld on additional rods. Probes of all lengths are available from the factory.

Fail-safe electronics provide peace of mind. The modular electronics make trouble shooting and repair a snap. The entire unit is backed by our two year warranty.

The probe is made of solid 316 stainless steel rod, the insulator is made of Delrin (teflon and other materials optional). The seals are made with Viton "O" rings. All the electronics are housed in a cast aluminum explosion-proof enclosure.

PDF Brochure - These are large files and download speeds vary.

• Download the free Adobe PDF Reader
• LS 6000 Owners Manual
• Level Switches Brochure